TAJ MAHAL



This is the miniature model of Taj Mahal that i made recently. You too can make one. The Taj Mahal enclosed in the case is 7"x7"x5" in size. I made this with thermocol and carved the various pillars and domes using sand paper.By referring the photographs of Taj Mahal, I first drew the basic outline, then the outline of the forms of the pillars and domes on paper. Then deciding on the proportions, i proceeded to make the various parts. Each part in the pillar has been made separately and then glued together using fevicol. For the smaller pillars i rolled paper strips and glued them in place. Once all the parts were glued and ready, i placed them in a flat square piece of thermocol of 7"x7" size. I also carved the finer details like doors and windows using a pencil. Then using OHP sheets i made a case for the Taj Mahal. For this i cut  5 pieces and then joined them using cellotape. I have given below some close up pictures.









4 comments:

  1. Awesome piece of work!!! You are the Shah Jahan of the thermocol world!!!

    ReplyDelete
  2. wow! very nice ...and multi talented....
    thanks for stopping by.....following you too!


    CHECK OUT My DIWALI Event and Recipes
    100 Friends/Followers & GIVEAWAY

    ReplyDelete
  3. very creative. must have taken a lot of time for all these minute details..

    ReplyDelete

Thanks for visiting this blog... Hope you would have found the posts helpful...

LinkWithin

Related Posts Plugin for WordPress, Blogger...

Follow by Email